FORGOT PASSWORD
REPORT A PROBLEM
Nitrogen Evaporator, MULTIVAP Series, Standard, without Controller and Heater, 9 Sample Positions
Article no.: 11809-O
The benchtop evaporator contains a rectangular gas distribution system mounted on a frame and dual post assembly, allowing the needles to be raised and lowered with ease. The manifold delivers nitrogen gas to the needles or glass pipettes, which direct the gas onto the sample’s surface. This method results in rapid solvent evaporation and sample concentration. In order to conserve nitrogen gas, the manifold has a toggle switch for every row of 3 samples, which allows the individual rows to be shut off when evaporating batches of less than 9 samples. Nitrogen gas flow is also controlled by an adjustable flow meter.
While evaporating from the 100 mL beakers, two 16 gauge needles can be used per sample, allowing for efficient evaporation of the large sample volume. When evaporating narrower vials using custom inserts, one needle is recommended. The needle gauge will vary depending on the shape and size of the sample.
This MULTIVAP uses nitrogen blow down to gently concentrate delicate samples at ambient temperature. The nitrogen distribution manifold offers continuous and evenly dispersed gas flow to each sample position through stainless steel needles.
High Capacity
Evaporate large volume samples of up to 100 mL each
Cost-Effective
Conserve gas by using ON/OFF valve for rows not in use
Consistent Results
Uniform evaporation across all samples with no adjustment needed between runs
Concentration at Ambient Temperatures
For analytical techniques which require the evaporation of organic solvents at ambient temperatures
Standard Features
+ Paper filled air filter for nitrogen supply
+ Adjustable flow meter to conserve nitrogen gas (0-25 LPM)
+ Phthalate free silicon tubing eliminates contamination concerns
+ Gas distribution manifold
+ Needles, 102 mm x 16 gauge with chrome plated brass hub and stainless-steel shaft
+ Dual pulley spring assembly for easy raising and lowering of the gas distribution manifold
+ Safety control cover plate
+ This model comes with a base and stand assembly instead of a heated bath. These instruments are designed for evaporation procedures performed at ambient temperature
Suggested products
Supplier information
Organomation
Organomation manufactures evaporator and extractor instruments required for sample preparation prior to chromatography.
Since 1959 Organomation Manufacturing Inc has been a leading provider of analytical chemistry sample preparation solutions. The company has provided decades of experience and unparalleled levels of customer satisfaction which stem from quality hand-built equipment.
